OPERATION INSTRUCTIONS :
When move the operation rod , the plunger ( iron core ) will be moved simultaneously so as to make cylinder become under negativepressure . Then , due to closed air pressure of the plank , the grease will get into the cylinder from the suction port . Now , operate the operating rod to extrude out the grease through pipe in the cylinder by principle of the plunger pushing open the specific pressure of 100kg/cm2 , down pressure valve will strart to eturn the grease to the oil tank . The operationg rod is to use of a spring to link on the injeector as a round storage tank to prevent from oil leaking.
ADVANTAGES :
1. Manual type pump . Use of single pipe , so no need of pipe return device . With simple piping for best effect .
2. Has smooth stickness to the lubricating surface with proper oiling capacity , so no surplus oil will be leaked out to stain with the surface of bench .
3. No need to worry about the dirts & impurities entered into the oiling port , so it is more clean than other ways of lubrication.
SPECIFICATION TABLE :
Spec.
Oil
Outlet
Capacity
Output Pressure
grease distributor
max.
SK-224-T03
Grease oil
2 cc / stroke
300 cc
100 kg / cm2
SD
60
SK-224-T08
800 cc
100 kg / cm2
SD
60
 
SINGLE CYCLE OIL DISTRIBUTOR ( SD , SD-S(sensor ) )
Max. operating pressure
140 kg / cm2
Recommended grease
NLG1 No.00~1
Discharged amount
0.1,0.14,0.18,0.24,0.3
Min. number of ports
3
Max. number of ports
16
SPECIFICATION TABLE :
TYPE
A
B
C
D
E
F
G
SD-2,3,4,5,6 ( S )
35
54
85.9
19
65.9
10.1
19
SD-7,8 ( S )
35
54
103.2
19
83.2
10.1
19
SD-9,10 ( S )
35
54
120.5
19
100.5
10.1
19
SD-11,12 ( S )
35
54
137.8
19
117.8
10.1
19
SD-13,14 ( S )
35
54
155.1
19
135.1
10.1
19
SD-15,16 ( S )
35
54
172.4
19
152.4
10.1
19
 
 
........................................................................................................................................................................................................
 



FUNCTION AND FEATURES :
1. May or fixed time the TIMER hypothesis and stops the time by PLC for the oil.
2. The high pressure puts out suits the high viscosity fat.
3. Attaches the overload safety valve, may protect the pump and reduce the pipeline damage.
MSK-6 SPECIFICATION TABLE :
Spec.
Flow cc/mm
Voltage
Power
Oil Tank Capacity
Max.Output Pressure
MSK-601
60 cc/ min
110 V
40 W
1.5L
100 kg / cm2
MSK-602
220 V
MSK-2 SPECIFICATION TABLE :
Spec.
Flow cc/mm
Voltage
Power
Oil Tank Capacity
Max.Output Pressure
MSK-201
20 cc/ min
110 V
6 W
300 cc / 1.5 L
40 kg / cm2
MSK-202
220 V
MSK-224
24 V
 
........................................................................................................................................................................................................